{"title":"Ball Pressurizers","description":"","products":[{"product_id":"891-presurizador-pascal-box","title":"Pascal Box Pressurizer 3B","description":"\u003ch2\u003eWhat is the Pascal Box padel ball pressurizer? Review\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202124;background:#FFFFFF;\" xml:lang=\"es\"\u003eThe \u003cb\u003ePascal Box\u003c\/b\u003e is a system that will guarantee that your balls always have the regulatory pressure and the perfect bounce.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom:19pt;background:#FFFFFF;\"\u003e\u003cb\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003ePascalBox\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003e causes the pressure inside to be higher than that of the outside. That is why it is normal for the lid to be a little hard when opening if the boat has been pressurized for several days. In any case, this variation in pressure should only offer a little resistance, if you have trouble opening the lid it is a sign that you are tightening it too much.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan lang=\"es\" xml:lang=\"es\"\u003eHow to open and close Pascal Box 3B from Bullpadel? Our opinion\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom:19pt;background:#FFFFFF;\"\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eYou just have to screw the lid of Pascal Box until it makes contact at the end of the thread, at that point it is only necessary to turn the width of a finger so that it is tight. Squeezing too hard can subject the lid to excessive fatigue, which could reduce its long-term strength.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom:19pt;background:#FFFFFF;\"\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eIf you notice that your \u003cb\u003ePascal\u003c\/b\u003e is not completely sealed when you close the lid, try to clean the gasket with a cloth or a dry cloth, it is very likely that some grit has been installed in it through which the air is filtered. In any case, over-tightening the lid is never the solution.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom:19pt;background:#FFFFFF;\"\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eIf from time to time you do a little maintenance of your \u003cb\u003ePascalbox\u003c\/b\u003e , cleaning and greasing the gasket, you should never have problems with its closure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom:19pt;background:#FFFFFF;\"\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eRemember to also use the air exhaust valve before opening the lid, to avoid subjecting it to excessive force.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan lang=\"es\" xml:lang=\"es\"\u003eHow to recover the balls with the Pascal box 3B padel pressurizer?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-left:50pt;text-indent:-18pt;background:#FFFFFF;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;color:#202020;\" xml:lang=\"es\"\u003e\u003cspan\u003e1.\u003cspan style=\"font:7pt 'Times New Roman';\"\u003e    \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e \u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eAfter inserting the balls into the container and closing the lid firmly, inject, with the help of the pump, the necessary pressure to bring the indicator up to 3\/4 of the orange zone. Keep the charger at this point for 72 hours to recharge the inside of the ball with this level of pressure.\u003c\/span\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;\" xml:lang=\"es\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-left:50pt;text-indent:-18pt;background:#FFFFFF;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;color:#202020;\" xml:lang=\"es\"\u003e\u003cspan\u003e2.\u003cspan style=\"font:7pt 'Times New Roman';\"\u003e    \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e \u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eRe-inject pressure until the indicator is at the beginning of the green area of Padel (regardless of the type of ball). Keep the pressurized charger at this point for another 72 hours.\u003c\/span\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;\" xml:lang=\"es\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-indent:-18pt;background:#FFFFFF;margin:0cm 0cm 23pt 50pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;color:#202020;\" xml:lang=\"es\"\u003e\u003cspan\u003e3.\u003cspan style=\"font:7pt 'Times New Roman';\"\u003e    \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e \u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eOnce step 2 is completed, take the needle to the green area corresponding to the type of ball and keep the charger at that point for 72 hours. The balls would have regained regulatory pressure and voted like day one. \u003c\/span\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;\" xml:lang=\"es\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom:16pt;background:#FFFFFF;\"\u003e\u003cb\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eImportant note:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003e If at any point in this procedure you notice that a ball is deformed, it is a sign that it is no longer in good condition to be recovered, so it would have to be thrown away.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan lang=\"es\" xml:lang=\"es\"\u003eHow to maintain or clean the \u003cspan style=\"color:#222222;\"\u003ePascal Box Padel pressurizer Bullpadel?\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom:16pt;background:#FFFFFF;\"\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eWith use, the container is filled with sand and impurities. When sand is lodged in the O-ring, small pressure losses can occur. To avoid this, you have to clean and lubricate this gasket (use grease, oil or petroleum jelly). Our recommendation is to lubricate the gasket with petroleum jelly abundantly (especially in the first uses).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom:16pt;background:#FFFFFF;\"\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eIf after a while (since the last pressurization of the charger) we detect that it has lost pressure, it may be due to one of these three causes that we detail below:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-left:50pt;text-indent:-18pt;background:#FFFFFF;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;color:#202020;\" xml:lang=\"es\"\u003e\u003cspan\u003e1.\u003cspan style=\"font:7pt 'Times New Roman';\"\u003e    \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e \u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eThat the lid has not been closed firmly enough.\u003c\/span\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;\" xml:lang=\"es\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-left:50pt;text-indent:-18pt;background:#FFFFFF;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;color:#202020;\" xml:lang=\"es\"\u003e\u003cspan\u003e2.\u003cspan style=\"font:7pt 'Times New Roman';\"\u003e    \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e \u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eThat the joint between container and lid houses sand or impurities.\u003c\/span\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;\" xml:lang=\"es\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-indent:-18pt;background:#FFFFFF;margin:0cm 0cm 23pt 50pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;color:#202020;\" xml:lang=\"es\"\u003e\u003cspan\u003e3.\u003cspan style=\"font:7pt 'Times New Roman';\"\u003e    \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e \u003cspan lang=\"es\" style=\"font-size:13pt;line-height:115%;font-family:Calibri, sans-serif;color:#202020;\" xml:lang=\"es\"\u003eDue to heavy use, the metal part inside the injection valve has been slightly loosened.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bullpadel","offers":[{"title":"Default Title","offer_id":58600874770806,"sku":"458542","price":71.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6333\/2214\/files\/1914.webp?v=1788436073"},{"product_id":"2581-pascal-box-4b","title":"Pascal Box 4B","description":"\u003ch2\u003eWhat is Pascal Box padel Ball Pressurizer ? Review\u003c\/h2\u003e \u003cp\u003eThe Pascal Box is a system that will guarantee that your balls always have the regulatory pressure and the perfect bounce.\u003c\/p\u003e \u003cp\u003ePascalBox causes the pressure inside to be greater than that on the outside. That's why it's normal for the lid to be a little hard when opening if the jar has been pressurized for several days. In any case, this variation in pressure should only offer a little resistance, if you have a hard time opening the lid it is a sign that you are tightening it too much.\u003c\/p\u003e \u003ch3\u003eHow to open and close Pascal Box 4B from Bullpadel? Our opinion\u003c\/h3\u003e \u003cp\u003eYou just have to screw the Pascal Box lid until it makes contact at the end of the thread, at that point it is only necessary to turn it the width of a finger so that it is well tightened. Tightening too hard can subject the lid to excessive fatigue, which could reduce its long-term strength.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003eIf you notice that your Pascal is not completely sealed when you close the lid, try cleaning the joint with a cloth or a dry cloth, it is very likely that some grit has settled in it through which the air is filtered. In any case, over-tightening the lid is never the solution.\u003c\/p\u003e \u003cp\u003eIf you occasionally do a little maintenance on your Pascalbox, cleaning and greasing the gasket, you should never have problems with its closure.\u003c\/p\u003e \u003cp\u003eAlso remember to use the air exhaust valve before opening the lid, to avoid subjecting it to excessive force\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003ch2\u003eHow to retrieve balls with the Pascal box 4B padel pressurizer?\u003c\/h2\u003e \u003cp\u003e1. After inserting the balls into the container and closing the lid firmly, inject, with the help of the pump, the pressure necessary to bring the indicator up to 3\/4 of the orange zone. Hold the magazine at this point for 72 hours to reload the inside of the ball with this level of pressure.\u003c\/p\u003e \u003cp\u003e2. Inject pressure again until the indicator is at the beginning of the green Padel zone (regardless of the type of ball). Keep the charger pressurized at this point for another 72 hours.\u003c\/p\u003e \u003cp\u003e3. Once step 2 is completed, bring the needle to the green area corresponding to the type of ball and keep the charger at that point for 72 hours. The balls would have regained the regulatory pressure and would vote as on the first day.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003cp\u003eImportant note: If at any point in this procedure you observe that a ball is deformed, it is a sign that it is no longer in good condition to be recovered, so it should be thrown.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003ch2\u003eHow to maintain or clean the Pascal Box Padel Bullpadel Pressurizer ?\u003c\/h2\u003e \u003cp\u003eWith use, the container fills with sand and impurities. When sand becomes lodged in the O-ring, small pressure losses can occur. To avoid this, this joint must be cleaned and lubricated (use grease, oil or petroleum jelly). Our recommendation is to lubricate the joint with petroleum jelly abundantly (especially in the first uses).\u003c\/p\u003e \u003cp\u003eIf after some time (since the last pressurization of the charger) we detect that it has lost pressure, it may be due to one of these three causes that we detail below:\u003c\/p\u003e \u003cp\u003e1. That the lid has not closed firmly enough.\u003c\/p\u003e \u003cp\u003e2. That the joint between container and lid harbors sand or impurities.\u003c\/p\u003e \u003cp\u003e3. Due to heavy use, the metal part inside the injection valve has loosened slightly.\u003c\/p\u003e","brand":"stock-padel","offers":[{"title":"Default Title","offer_id":58601020916086,"sku":"465356","price":69.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6333\/2214\/files\/8341.webp?v=1788437531"},{"product_id":"3345-presurizador-press-pro-softee-con-bomba","title":"Press pro Softee Pressurizer with Pump","description":"","brand":"Enebe","offers":[{"title":"Default Title","offer_id":58601409151350,"sku":"A006219","price":42.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6333\/2214\/files\/12515.webp?v=1788441128"}],"url":"https:\/\/www.stockpadel.com\/en\/collections\/200-ball-pressurizers.oembed","provider":"Stock Padel","version":"1.0","type":"link"}